Introduction
MAP-203 is specially designed for the food and pharmaceutical industries. It can simultaneously detect oxygen and carbon dioxide in modified atmosphere packaging. It can be applied to all food industries and some pharmaceutical industries. This product is very suitable for the rapid and accurate detection of modified atmosphere packaging products in packaging lines, supermarkets and laboratories.
MAP-203 can measure the content of O 2/CO 2 very quickly in a few seconds. It is quite simple to use, without adjusting the flow rate, without temperature compensation, without considering cross-sensitivity and other technical factors. As long as the power on, direct detection.
Characteristic
Portable headspace analyzer
Rapid and Accurate Detection of Oxygen/Carbon Dioxide
Full Chinese interface, intuitive user interface, no training and direct use
Simple calibration steps
Large touch screen for easy reading
High Precision Full Range Detection Range
10 sets of data storage
Inspection needle placement hole, easy to carry
Typical applications
Fresh meat
Seafood
Cooked Food
Dairy
Fast Food
Bake
Salad
Coffee
Pharmacy
Glove box
agricultural research
Controlled storage
welding
Other
Working principle
oxygen
The core component of MAP-203 is an electrochemical oxygen sensor. The principle of the sensor is similar to that of a battery. When gas passes through the sensor, the sensor can generate current corresponding to the gas concentration. The current value can be converted to the concentration value and displayed on the display screen. The sensor has excellent strength and stability, high repeatability and fast response speed. Even if the oxygen concentration is high, the sensor will not be saturated, so the application range of MAP-201 is very wide, the range is 0-99.9%, and the display accuracy is very high - in addition, it is still excellent in speed and accuracy.
Carbon dioxide
CO2 sensor is a kind of independent non-dispersive infrared sensor, which is equipped with infrared light source and single wavelength filter. The sensor is a whole, without moving parts, and has a very strong structure. The range of CO2 sensor is 0-99.9%. Sensors are calibrated only once every six months, and readings are not affected by humidity or temperature.
Technical Parameter
check the accuracy | O2： ±0.1%（Absolute accuracy）@ O2≤10.0% ±1%（Relative precision）@100%≥O2≥10.0% CO2: <±2.0%@ Full range（at20℃） |
Detection mode | O2：Electrochemistry CO2:Non-dispersive Infrared Sensor(NDIR) |
Detection range | O2: 0~99.9% (Resolving power：0.1%) CO2:0~99.9% (Resolving power：0.1%) |
response time | Adjustable，6～10 秒 |
Sensor life | Oxygen sensor for 2 years; Carbon dioxide sensor without limitation |
Minimum required sample gas | Conventional pipeline :<15ml |
Gas sampling | The built-in pump inhales automatically through the testing needle |
calibration | oxygen：1 point calibration (air) Carbon dioxide: 2-point calibration(0%和100%) |
user interface | 2.4”OLEDMonitor |
Data storage50 sets of test data | |
Power Supply | Power adapter: 7V Four Nickel-Hydrogen Rechargeable Batteries New batteries can be tested 2,500 times after charging |
Automatic shutdown | Automatic shutdown after 1 minute |
ambient temperature | 0-40 Centigrade |
Ambient humidity | <95 %RH |
size | 160mmx75mmx43mm (LxWxH) |
weight | 0.45Kg |
